HOME  > PRODUCT  > DRIVER  > iD 460x Driver

iD 460x Driver

iD 460X- PRGR High Repulsion Driver

Two loft variations, 9.5° and 10.5° and three shaft types, M-43, M-40, and M-37 according to head speed are available.
The most distinctive feature of iD460X is its potential for greater distance. To achieve a long flying distance, a high repulsion head (*not in conformance with SLE rules) was adopted. In addition, to increase head speed, a long length of 46 inches was adopted. While the shape of the head is basic, the face wall thickness was maximally reduced to achieve high repulsion performance. Furthermore, to display the initial speed performance even if the strike points are inconsistent, a wide high initial speed area was secured. Regarding the center of gravity design, chemical milling was performed for the entire crown in order to trim weight. As a result, the center of gravity is low (center of gravity height rate: 60%) and deep (GR: 21mm), and low spin is possible. The shaft is designed to be light, resilient, with good acceleration, without feeling long. Furthermore, the champagne gold color system for the head and shaft provide a sense of high-grade for this product.

*The SLE rules (SLE: Spring-Like Effect) is defined by R&A prohibiting the use of high repulsion golf clubs with a coefficient of repulsion of more than 0.830 for tournaments as of January 1, 2008. This product does not conform to SLE rules due to high repulsion design and cannot be used in official tournaments.

Head Design Features

High- Repulsion Head that Achieves Greater Distance (COR more than 0.83)

Face board thickness

Face board thickness(mm)

A

B

C

D

E

3.35

3.1

2.55

2.5

2.1

High-repulsion performance could be achieved by
maximally reducing face thickness

High-repulsion performance could be achieved by maximally reducing face thickness

Face board thickness

Face board thickness(mm)

(1)

(2)

0.35

0.55

Chemical milling is performed for the entire crown, creating a low (center of gravity height rate: 60%) and deep (GR: 21mm) center of gravity design, and achieving a large initial flying angle and low spin.

 

Center of
gravity
distance
(mm)

FP
(mm)

GR
(mm)

Center of
gravity
depth
(mm)

Center of
gravity
height rate
(%)

Center of
gravity
angle( °)

iD460X
(10.5°)

40

20

21

41

60

27

Proper grip of the ball could be achieved by a 40 mm range and 27°angle of the center of gravity The head shape is orthodox and does not to look extremely shallow or large

iD460X Specifications

 

M-43

M-40

M-37

Loft Angle(°)

9.5 / 10.5

9.5 / 10.5

10.5

Length (inch)

46

Total weight (g)

290

286

285

Balance

C-9.5

C-9

C-8.5

Cubic volume (cm3)

460

All specs above are for reference only

*Not in conformance with SLE rules
*Head material: Face (Ti9, KS120), Crown/Sole (KS120/KS100, Pure Titanium), Neck (Pure Titanium)
*Head manufacturing process: Face (Forging), Crown/Sole (Rolled Metal), Neck (Forging)
*Country of origin: Made in Japan
*Attached original head cover (Made in China)

ANGLE VIEW

PRGRWEB

COPYRIGHT 2013 YOKOHAMA RUBBER.ALL right reserved