HOME  > PRODUCT  > FAIRWAY WOOD  > RS RED FAIRWAY WOOD

RS RED FAIRWAY WOOD

Produce more distance thanks to its gentleness.
This synergistic effect will not let you down.

A characteristic of the RS RED Fairway Wood is the wide sweet area based on its Double Design. It is made of a thin titanium L cup face to achieve a larger high-resilience area. It inherits its distance performance from the driver that allows golfers to gain distance gently.

Golfer's actual hitting point Enhanced initial velocity performance near
an area 17mm off the ground.

Made with a body thinned to its limit and surplus weight placed further to its sole.
Larger center of gravity angle and center of gravity.

ANGLE VIEW

DESIGN

SPEC

Club #

3w

5w

7w

Loft angle(°)

15.0

17.0

20.0

Volume(cm3)

193

172

162

Face angle(°)

-2.0

-3.0

-3.0

Lie angle(°)

59.5

60.0

60.5

Length(inch)

S (M-43)

43.25

42.75

42.25

SR (M-40)

43.25

42.75

42.25

R (M-37)

43.25

42.75

42.25

R2 (M-35)

42.75

42.25

41.75

Total weight(g)

S (M-43)

297

301

305

SR (M-40)

292

295

299

R (M-37)

289

292

297

R2 (M-35)

288

290

294

Balance

S (M-43)

D-1.0

D-1.0

D-1.0

SR (M-40)

D-0

D-0

D-0

R (M-37)

D-0

D-0

D-0

R2 (M-35)

C-7.5

C-7.5

C-7.5

Shaft weight(g)

S (M-43)

52.0

51.0

50.0

SR (M-40)

46.0

46.0

45.0

R (M-37)

45.0

44.0

44.0

R2 (M-35)

43.0

42.0

41.0

Shaft torque(°)

S (M-43)

6.0

6.0

6.0

SR (M-40)

6.2

6.2

6.2

R (M-37)

6.2

6.2

6.2

R2 (M-35)

6.2

6.2

6.2

Shaft KP

H

Grip

Weight: 36.0, Diameter: 60, Code: None, Back line: Yes

Material

Face・Body:Titanium(Ti-6Al-4V)

Manufacturing process

Face: Rolled metal
Body: Vacuum precision casting

<Made in JAPAN><Made in CHINA>
*Conforms to SLE rules
*With an original head cover (made in CHINA), a special wrench.
*Club length: determined by JGGA measurement.

Comparison of RS FAIRWAY WOOD

Comparison of RS FAIRWAY WOOD

 

RS RED FAIRWAY WOOD

 

RS FAIRWAY WOOD

Club #

3w

5w

7w

 

3w

5w

7w

Loft angle(°)

15.0

17.0

20.0

 

15.0

18.0

21.0

Volume(cm3)

193

172

162

 

177

170

156

Face angle(°)

-2.0

-3.0

-3.0

 

-4.0

Lie angle(°)

59.5

60.0

60.5

 

57.5

57.5

58.0

Length(inch)

S (M-43)

43.25

42.75

42.25

 

43.0

42.5

42.0

SR (M-40)

43.25

42.75

42.25

 

43.0

42.5

42.0

R (M-37)

43.25

42.75

42.25

 

43.0

42.5

42.0

R2 (M-35)

42.75

42.25

41.75

 

-

Total weight(g)

S (M-43)

297

301

305

 

325

328

332

SR (M-40)

292

295

299

 

320

323

327

R (M-37)

289

292

297

 

315

318

322

R2 (M-35)

288

290

294

 

-

Balance

S (M-43)

D-1.0

D-1.0

D-1.0

 

D-1.5

SR (M-40)

D-0

D-0

D-0

 

D-1.0

R (M-37)

D-0

D-0

D-0

 

D-0.5

R2 (M-35)

C-7.5

C-7.5

C-7.5

 

-

Shaft weight(g)

S (M-43)

52.0

51.0

50.0

 

60

59

59

SR (M-40)

46.0

46.0

45.0

 

55

54

54

R (M-37)

45.0

44.0

44.0

 

50

49

49

R2 (M-35)

43.0

42.0

41.0

 

-

Shaft torque(°)

S (M-43)

6.0

6.0

6.0

 

4.4

SR (M-40)

6.2

6.2

6.2

 

4.4

R (M-37)

6.2

6.2

6.2

 

4.9

R2 (M-35)

6.2

6.2

6.2

 

-

Shaft KP

H

 

M

Grip

Weight: 36.0, Diameter: 60, Code: None, Back line: Yes

 

Weight: 50.0, Diameter:60, Code:None, Back line:None

Material

Face・Body:Titanium(Ti-6Al-4V)

 

Face:Maraging steel(455)
Body:Maraging steel(AM355P)

Manufacturing process

Face: Rolled metal
Body: Vacuum precision casting

 

Face:Rolled metal
Body:Precision casting

PRGRWEB

COPYRIGHT 2017 YOKOHAMA RUBBER.ALL right reserved