SUPER egg IRON(High repulsion model) (Ladies') | WOMANS

smilin'

HOME ＞ PRODUCT ＞ WOMANS ＞ SUPER egg IRON(High repulsion model) (Ladies')

new

SUPER egg IRON(High repulsion model) (Ladies')

Attacking the green with high COR and high ball flight like nothing before.

Non-conforming face using high strength maraging steel face
Hollow structure and very forgiving head
Low・deep center + Large FP design, provides high ball flight never seen before.
Hit irons with High COR + high ball flight.
AS、SW adopts a 凹 style scoreline

Iron does not conform to the SLE Rules in order to produce high COR
Hollow Body and wide sole structure to increase forgiveness

「Low and Deep Center」+「Large FP Structure」
Strong lofted irons、with low and deep center helps high launch and high ball flight than ever before.

AS、SW adopts a 凹 style scoreline (non-conforming)
Pursues not only long distance but also spin performance.

Bends at the end of the grip for acceleration and has a firm tip to lessen mis hits
Designed so that it bends softly during the downswing

ANGLE VIEW

DESIGN

SPEC

Shaft specs		#6	#7	#8	#9	P	A	As	S
Loft angle/bounce angle(°)		23	25	28	32	37/3.5	43/3.5	49/9.5	56/11.5
Lie angle(°)		61.5	62	62.5	63	63.5	63.5	64	64
Face progression(mm)		8.5	8.0	8.0	7.5	7.0	6.5	6.5	6.5
Length(inch)	M-30 (L)	37.5	37	36.5	36	35.5	34.75	34.25	34.25
Total weight(g)	M-30 (L)	334	342	348	356	366	378	385	385
Balance	M-30 (L)	C-3
Shaft weight(g)	M-30 (L)	42	43	43	45	47	47	48	48
Shaft torque(°)	M-30 (L)	4.2	4.1	4.0	3.5	3.0	3.0	3.0	3.0
Shaft KP		M
Grip		Weight: 42.5, Diameter: M60, Code: None, Back line: Yes
Materials		#6-A / Maraging steel (MAS1C) #6-S / Maraging steel (HS1400)
Manufacturing		#6-A / Face: Rolled metal #6-S / Body: Precision casting

<Made in JAPAN><Made in CHINA>
*SUPER egg IRON does not conform to R&A and USGA SLE rules. See here for details.
*With original head cover (Made in China)
*Club length: determined by PRGR measurement.

Comparison of NEW egg IRON

		SUPER egg IRON			NEW egg IRON
Shaft specs		#7	#8	#9	#7	#8	#9
Loft angle/bounce angle(°)		25	28	32	25	28	32
Lie angle(°)		62	62.5	63	62	62.5	63
Face progression(mm)		8.0	8.0	7.5	4.0	3.0	3.0
Length(inch)	M-30 (L)	37	36.5	36	37.00	36.50	36.00
Total weight(g)	M-30 (L)	342	348	356	335	341	349
Balance	M-30 (L)	C-3			C-3.0
Shaft weight(g)	M-30 (L)	43	43	45	42	42	43
Shaft torque(°)	M-30 (L)	4.1	4.0	3.5	4.1	4.1	3.8
Shaft KP	M-30 (L)	M			M
Grip		Weight: 42.5, Diameter: M60, Code: None, Back line: Yes			Weight: 37.5, Diameter: M60, Code: None, Back line: Yes
Materials		#6-A / Maraging steel (MAS1C) #6-S / Maraging steel (HS1400)			Face-Body: Maraging steel (AM355P) Weight: Tungsten alloy(Ni, W, Fe) (#7-P)
Manufacturing		#6-A / Face: Rolled metal #6-S / Body: Precision casting			Face-Body: Precision casting Weight: Precision casting

		SUPER egg IRON				NEW egg IRON
Shaft specs		P	A	As	S	P	A	As	S
Loft angle/bounce angle(°)		37/3.5	43/3.5	49/9.5	56/11.5	37	43/7.0	49/7.0	56/7.0
Lie angle(°)		63.5	63.5	64	64	63.5	63.5	64	64
Face progression(mm)		7.0	6.5	6.5	6.5	3.0	4.0	4.0	4.0
Length(inch)	M-30 (L)	35.5	34.75	34.25	34.25	35.50	34.75	34.25	34.25
Total weight(g)	M-30 (L)	366	378	385	385	357	372	379	379
Balance	M-30 (L)	C-3				C-3.0
Shaft weight(g)	M-30 (L)	47	47	48	48	45	47	48	48
Shaft torque(°)	M-30 (L)	3.0	3.0	3.0	3.0	3.3	3.0	2.9	2.9
Shaft KP	M-30 (L)	M				M
Grip		Weight: 42.5, Diameter: M60, Code: None, Back line: Yes				Weight: 37.5, Diameter: M60, Code: None, Back line: Yes
Materials		#6-A / Maraging steel (MAS1C) #6-S / Maraging steel (HS1400)				Face-Body: Maraging steel (AM355P) Weight: Tungsten alloy(Ni, W, Fe) (#7-P)
Manufacturing		#6-A / Face: Rolled metal #6-S / Body: Precision casting				Face-Body: Precision casting Weight: Precision casting