HOME ＞ PRODUCT ＞ DRIVER ＞ LS DRIVER
For you around 40m/s head speed.
Blast off like a female pro with the most powerful head with low and deep center of gravity in PRGR history.
A golfer with a head speed of around 40m/s will be able to generate a high trajectory, low spin, maximum distance trajectory.
The new LS is a driver that replicates the "big carry and long run" of the female pros. Evolved basement construction and a new DB sole create the most powerful head with low and deep center of gravity in PRGR history.
High precision CNC molded cup face, lightweight speed design for high initial speeds and high hit rates.
Low spin ball, that is easy to lift and easy to hold, has a pleasant sound and launches hard and high.
A low center of gravity is achieved by lowering the sole behind the head.
Produced with twice the thickness precision compared to normal CNC machining to achieve the superior rebound performance.
A face design in which the thinnest part of the uneven thickness face is greatly widened and the center of the face is greatly curved.
The stiffness of the hand part is slightly lowered and the stiffness of the tip is increased. Low spin and direction became more stable.
Making golf simple, smooth. For this purpose, the combination of LS series and 05IRON is recommended. Based on the smooth flying of the LS driver, FW, UT, middle irons, short irons, and wedges were grouped to unify the club length and weight. If you can clearly distinguish the flight distance with the same image and the same swing, your shot will be stable. From the 13th swing to the 6th swing, it is the beginning of a new golf.
ANGLE VIEW
DESIGN
SPEC
|
Shaft Specs |
S (M-43) |
SR (M-40) |
R (M-37) |
R2 (M35) |
|||
|---|---|---|---|---|---|---|---|
|
Loft angles(°) |
10.5 |
10.5 |
11.5 |
10.5 |
11.5 |
10.5 |
11.5 |
|
Volume(cm3) |
460 |
||||||
|
Face angle (°) |
±0 |
||||||
|
Lie angle(°) |
59.5 |
||||||
|
Length(inch) |
45.75 |
45.25 |
|||||
|
Total weight(g) |
288 |
283 |
282 |
281 |
|||
|
Balance |
D-1 |
D-0 |
C-7.5 |
||||
|
Shaft weight(g) |
46 |
42 |
41 |
40 |
|||
|
Shaft torque(°) |
7 |
7.3 |
7.6 |
8 |
|||
|
Shaft KP |
H |
||||||
|
Grip |
Weight: 43, Diameter: M60, Code: None, Back line: Yes |
||||||
|
Materials |
Face: Titanium(TP2) |
||||||
|
Manufacturing |
Face: Forged, CNC milling |
||||||
<Made in JAPAN><Made in CHINA>
*With original head cover (Made in China)
*Club length: determined by JGGA measurement.
Comparison of RS DRIVER
|
LS DRIVER |
RS DRIVER |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Shaft Specs |
S (M-43) |
SR (M-40) |
R (M-37) |
R2 (M35) |
S (M-43) |
SR (M-40) |
R (M-37) |
|||||||
|
Loft angles(°) |
10.5 |
10.5 |
11.5 |
10.5 |
11.5 |
10.5 |
11.5 |
9.5 |
10.5 |
9.5 |
10.5 |
10.5 |
||
|
Volume(cm3) |
460 |
460 |
||||||||||||
|
Face angle (°) |
±0 |
-3 |
||||||||||||
|
Lie angle(°) |
59.5 |
57 |
||||||||||||
|
Length(inch) |
45.75 |
45.25 |
45.5 |
|||||||||||
|
Total weight(g) |
288 |
283 |
282 |
281 |
310 |
305 |
300 |
|||||||
|
Balance |
D-1 |
D-0 |
C-7.5 |
D-2 |
D-1.5 |
D-1 |
||||||||
|
Shaft weight(g) |
46 |
42 |
41 |
40 |
57 |
52 |
47 |
|||||||
|
Shaft torque(°) |
7 |
7.3 |
7.6 |
8 |
4.8 |
5 |
5.7 |
|||||||
|
Shaft KP |
H |
M |
||||||||||||
|
Grip |
Weight: 43, Diameter: M60, Code: None, Back line: Yes |
Weight: 50, Diameter: 60, Code: None, Back line: None |
||||||||||||
|
Materials |
Face: Titanium(TP2) |
Face: Titanium (Ti-6Al-4V)
|
||||||||||||
|
Manufacturing |
Face: Forged, CNC milling |
Face: CNC milling |
||||||||||||
RELATED PRODUCTS
COPYRIGHT 2017 YOKOHAMA RUBBER.ALL right reserved